My Basket
Sub Total:


We accept the following payment methods:

Follow us on Twitter

Follow us on Twitter

Atlas 1900BHA Bunded Plastic Heating Oil Tank

Click image to enlarge 
1,294.00 ex VAT
1,294.00 inc VAT

Related Options

1,294.00 ( 1,552.80 inc VAT)
1,294.00 ( 1,552.80 inc VAT)

Product Information
Product Reference: 1900BHA
Maximum Capacity: 1900 litres
Nominal Capacity: 1710 litres
Length: 2190 mm
Width: 1540 mm
Height: 1460 mm
Material: MDPE Plastic
UV Stabilised: Yes

Related Products

Fozmula Economy Bund Warning Alarm
Fozmula Economy Bund Warning Alarm
77.50 ( 93.00 inc VAT)


Product Overview
Benefiting from integrally bunded construction, every Atlas Bunded Oil Tank consists of a ‘tank within a tank’. Fuel is stored within the inner, whilst the outer tank – often referred to as a ‘bund’ – acts as a failsafe in the event of a spill.
Bunded Tanks are today a requirement at many residential heating oil storage installations, together with all commercial, industrial and institutional fuel storage installations too. When professionally installed, Atlas Bunded Oil Tanks will assist in achieving compliance with all current and expected technical, environmental and regulatory fuel storage requirements.
Fitted with the market leading WatchmanSonic electronic oil tank contents monitor, each Atlas Bunded Tank also benefits from inbuilt intelligence as standard. The WatchmanSonic monitors the level of fuel inside the tank and wirelessly relays this information to a receiver unit, which simply plugs into any domestic electrical socket.
Atlas Bunded Tanks can also be supplied with a choice of environmentally preferred top or traditional bottom outlet position is also available - just specify your requirements at time of order placement.
Standard Equipment: All Models
Rotationally moulded Bunded Plastic Heating Oil Tank supplied complete with:
  • 2” BSP Fill Point with Plastic Screw Cap and Chain;
  • 4” Inspection Aperture with Plastic Screw Cap;
  • Vent;
  • WatchmanSonic Electronic Oil Tank Contents Gauge;
  • Lockable Manhole Access;
  • SpillStop Mechanical Overfill Prevention Valve.
Additional Standard Equipment: Bottom Outlet Models Only
  • Bottom Outlet Oil Tank Fitting Kit which includes Isolation Valve; Filter Bowl; PTFE Tape and Heldite Liquid Sealant;
  • 1” BSP Bottom Outlet.
Additional Standard Equipment: Top Outlet Models Only
  • Top Outlet including Suction Pipe and Isolation Valve.
Bunded Plastic Oil Tank suitable for the above ground storage of Heating Oil at single-family dwellings, agricultural, commercial, industrial and institutional premises in the United Kingdom.
All Atlas Bunded Tanks are compliant with applicable regulations contained within The Control of Pollution (Oil Storage) (England) Regulations 2001, The Water Environment (Oil Storage) (Scotland) Regulations 2006, The Control of Pollution (Oil Storage) Regulations (Northern Ireland) 2010, The Control of Pollution (Silage, Slurry and Agricultural Fuel Oil) Regulations (Northern Ireland) 2003, The Control of Pollution (Silage, Slurry and Agricultural Fuel Oil) Regulations 1991 and comparable requirements throughout the United Kingdom.
Please be aware Atlas Bunded Oil Tanks are unsuitable for the storage of fuel for supply to vehicles and / or plant equipment via gravity fed fuel delivery systems incorporating a flexible hose and trigger nozzle.
Important Information: Top Outlet Tanks only
Please note that Atlas Top Outlet Bunded Oil Tanks are only suitable for use at selected installations incorporating a suitable pressure jet burner and in accordance with the requirements of OFTEC Technical Book 3.
If in doubt, please contact your boiler, cooker or stove manufacturer to confirm compatibility. Please be aware that will not be responsible for incorrect product selection.
Installation Requirements
Please note that all oil tanks should only be installed by a suitably competent person (e.g. an OFTEC Registered Technician, or similarly competent person) in accordance with supplied instructions and prevailing statutory requirements. 
Delivery and Payment: Atlas Oil Tanks
Price(s) stated are inclusive of delivery to most addresses in Great Britain or Northern Ireland, excluding offshore locations and subject to access for an articulated lorry. However for some Atlas products, some parts of Scotland may incur additional costs, Please contact us before ordering to confirm. If access to your premises is restricted please advise at time of order placement. Please note it is the customer’s responsibility to arrange for the tank to be offloaded from the delivery vehicle to the customer’s premises. Please allow up to 10 working days for delivery. accepts Delta, Maestro / Switch, Mastercard and Visa. Your credit / debit card will be charged at time of order placement.
IMPORTANT INFORMATION Please note that all images are supplied for reference purposes only. All dimensions and capacities stated are approximate. Consistent with’s policy of continual improvement, the right is reserved to amend product specifications without notice.
Website design & content, unless otherwise indicated © 2020 Tank Depot. Website framework and database design © UK Websystems.
Developed & hosted by UK Websystems. Access to and use of this website is subject to the Terms and Conditions of Access and Use