Harlequin 10000BFA BioFuel Station Arctic Bunded BioDiesel Tank
From £9,850.00 ex VAT
From £11,573.75 inc VAT
|
 |
| Product Information |
 |
|
| Product Reference: |
10000BFA |
| Maximum Capacity: |
10100 litres |
| Nominal Capacity: |
9595 litres |
| Length: |
3250 mm |
| Width: |
2800 mm |
| Height: |
3350 mm |
| Material: |
MDPE Plastic |
| UV Stabilised: |
Yes |
|
Related Products
Important Product Information
Please note that due to exceptional demand this product is currently subject to a 6 week delivery leadtime.
Product Overview
Harlequin BioFuel Stations are the first of a new generation of storage tank, developed especially for the safe, secure and environmentally responsible storage of up to B100 Grade (100%) BioDiesel, in accordance with the Summer and Winter CFPP fuel requirements as defined in British Standard BS EN14214.
Fully bunded and manufactured from an advanced, BioDiesel resistant grade of Medium Density Polyethylene Plastic – Harlequin BioFuel Stations are fully compliant with the most demanding British and European Regulations, including The Control of Pollution (Oil Storage) (England) Regulations 2001 and The Water Environment (Oil Storage) Scotland Regulations 2006.
Arctic Grade Harlequin BioFuel Stations have been engineered for use in cold weather conditions, where the temperature may fall below the Cold Filter Plug Point (CFFP) of stored BioDiesel. An insulated inner tank and thermostatically controlled heat trace system can maintain the properties of stored fuel in temperatures as below -20°C. CFPP is the temperature at or below which the fuel may begin to cause operational problems with a vehicle’s fuel system. Your BioDiesel supplier can advise of the CFPP specific to your fuel type.
Please note that when stored fuel has been produced in accordance with the national Summer and Winter fuel requirements stated within British Standard BS EN14214, an Arctic Grade Harlequin BioFuel Station will not normally be required at most installations within the United Kingdom and a Standard Grade model will normally suffice.
Standard Equipment
Rotationally moulded bunded diesel storage and dispensing tank, supplied complete with:
-
Offset 2” BSP Fill Point with Plastic Screw Cap and Chain
-
4” Inspection Aperture with Plastic Screw Cap
-
Vent
-
Electronic Oil Tank Contents Gauge
-
Bund Warning Alarm
-
Inbuilt LRC failsafe overfill prevention capability
-
BioDiesel compatible pump 240v Piusi Pump
-
BioDiesel resistant 6 metre Fuel Delivery Hose
-
BioDiesel resistant Automatic Shut Off Nozzle
-
Digital Flow Meter [+/-0.5% Accuracy | +/-0.2% Repeatability]
-
Emergency Isolation Switch
-
BioDiesel compatible Fuel Filtration Filter
-
Bunded Construction
-
Insulated Inner Tank
-
Thermostatically activated Heat Trace System
Applications
Plastic bunded storage and dispensing tank suitable for use with BioDiesel with a maximum bio-element of 100% (i.e. Grade B100) in accordance with UK fuel requirements contained within British Standard BS EN 14214.
Fully compliant with all relevant product requirements contained within The Control of Pollution (Oil Storage) (England) Regulations 2001, The Water Environment (Oil Storage) (Scotland) Regulations 2006 and comparable requirements throughout the United Kingdom.
10000BFA-240 Fuel Station with 80 User Fuel Management System
Specification as per Harlequin 10000BFA-240 BioFuel Station 240 volt but additionally supplied with factory fitted fuel management system complete with Secure Key activation. Restricts refuelling to users issued with a Secure Key, reducing the risk of unauthorised use, fuel theft and fraud. Suitable for use with up to 80 users and supplied as standard with:
The fuel management system automatically memorises the last 200 fills and this information can be hardwired to a PC up to 0.8km away, or downloaded and transferred via the Administration Key.
Please note that when a fuel management system is specified, a digital flow meter is not supplied.
NEW! All Harlequin BioFuel Stations supplied with a Fuel Management System now come complete with free on site system commissioning - that's a saving of £350+VAT!
Installation Requirements
This BioDiesel Storage and Dispensing Tank must be installed by a suitably competent person in accordance with statutory requirements.
All mains electrical connections must only be undertaken by a qualified electrician in accordance with prevailing statutory requirements. It is recommended that all Harlequin BioFuel Stations are connected to an RCD protected mains power supply.
Harlequin BioFuel Stations are supplied with a 2 year warranty against material, manufacturing and design defect on the primary storage tank and bund; together with a 1 year warranty on supplied fuel transfer and ancillary equipment.
Product Information
Additional product information can be obtained by downloading the Harlequin BioFuel Station BioDiesel Storage and Dispensing Tank Brochure - click the link below:
Delivery and Payment
Price(s) stated are inclusive of delivery to any address in Great Britain or Northern Ireland, excluding offshore locations and subject to access for an articulated lorry. If access to your premises is restricted please advise at time of order placement.
Please note it is the customer’s responsibility to arrange for the tank to be offloaded from the delivery vehicle to the customer’s premises. Please note that due to exceptional demand, this product is subject to an extended delivery period. Please allow up to 20 working days for delivery.
IMPORTANT INFORMATION Please note that all images are supplied for reference purposes only. All tank dimensions and capacities stated are approximate. Consistent with TankDepot.co.uk’s policy of continual improvement, the right is reserved to amend product specifications without notice. E&OE.
