My Basket
0
Items:
£0.00
Sub Total:
£0.00
VAT:

£0.00
Total:

We accept the following payment methods:


Follow us on Twitter

Follow us on Twitter

Harlequin 2500BFA BioFuel Station Arctic Bunded Biodiesel Tank

Click image to enlarge 
£5,030.00 ex VAT
£5,030.00 inc VAT

Related Options

£100.00 ( £120.00 inc VAT)
 

Product Information
Product Reference: 2500BFA
Maximum Capacity: 2579 litres
Nominal Capacity: 2450 litres
Diameter: 2090 mm
Height: 1800 mm
Material: MDPE Plastic
UV Stabilised: Yes

 

Product Overview
 
Harlequin BioFuel Stations are the first of a new generation of Fuel Tank, developed especially for the safe, secure and environmentally responsible storage of up to B100 Grade (100%) Biodiesel, in accordance with British Standard BS EN14214.
 
Fully bunded and manufactured from an advanced, Biodiesel resistant grade of Medium Density Polyethylene Plastic – Harlequin BioFuel Stations are fully compliant with the most demanding British and European Regulations.
 
Arctic Grade Harlequin BioFuel Stations have been engineered for use in cold weather conditions, where the temperature may fall below the Cold Filter Plug Point (CFFP) of stored BioDiesel. An insulated inner tank and thermostatically controlled heat trace system helps maintain the properties of stored fuel in temperatures as low as -20°C. CFPP is the temperature at or below which the fuel may begin to cause operational problems with a vehicle’s fuel system. Your Biodiesel supplier can advise of the CFPP specific to your fuel type.
  
Please note that when stored fuel has been produced in accordance with the national Summer and Winter fuel requirements stated within British Standard BS EN14214, an Arctic Grade Harlequin BioFuel Station will not normally be required at most installations within the United Kingdom and a Standard Grade model will normally suffice.
 
Standard Equipment
  
Rotationally moulded bunded diesel storage and dispensing tank, supplied complete with:
  • 2” BSP Fill Point with Plastic Screw Cap and Chain
  • 4” Inspection Aperture with Plastic Screw Cap
  • Vent
  • Fuel Tank Contents Dipstick
  • Apollo Electronic Oil Tank Contents Gauge
  • Inbuilt LRC failsafe overfill prevention capability
  • Biodiesel compatible pump 240v Piusi Pump
  • Biodiesel resistant 4 metre Fuel Delivery Hose
  • Mechanical Flow Meter with Resetable Batch Totaliser
  • Biodiesel resistant Automatic Shut Off Nozzle
  • Emergency Isolation Switch
  • BioDiesel compatible Fuel Filtration Filter
  • Bunded Construction
  • Insulated Inner Tank
  • Thermostatically activated Heat Trace System
Applications
 
Plastic bunded storage and dispensing tank suitable for use with Biodiesel with a maximum bio-element of 100% (i.e. Grade B100) in accordance with British Standard BS EN 14214.
 
Compliant with all relevant product requirements contained within The Control of Pollution (Oil Storage) (England) Regulations 2001, The Water Environment (Oil Storage) (Scotland) Regulations 2006, The Control of Pollution (Oil Storage) Regulations (Northern Ireland) 2010, The Control of Pollution (Silage, Slurry and Agricultural Fuel Oil) Regulations (Northern Ireland) 2003, The Control of Pollution (Silage, Slurry and Agricultural Fuel Oil) Regulations 1991 and comparable requirements throughout the United Kingdom.
 
Installation Requirements
 
This Biodiesel Storage and Dispensing Tank must be installed by a suitably competent person in accordance with statutory requirements and supplied instructions. 
 
All mains electrical connections must only be undertaken by a qualified electrician in accordance with prevailing statutory requirements. It is recommended that all Harlequin BioFuel Stations are connected to an RCD protected mains power supply.
 
Harlequin BioFuel Stations are supplied with a 2 year warranty against material, manufacturing and design defect on the primary storage tank and bund; together with a 1 year warranty on supplied fuel transfer and ancillary equipment.
 
Product Information
 
Additional product information can be obtained by downloading the Harlequin Fuel Tank Brochure - click the link below:
 
  
Delivery and Payment
 
Price(s) stated are inclusive of delivery to any address in Great Britain or Northern Ireland, excluding offshore locations and subject to access for an articulated lorry. If access to your premises is restricted please advise at time of order placement.
 
Please note it is the customer’s responsibility to arrange for the tank to be offloaded from the delivery vehicle to the customer’s premises. Please allow up to 20 working days for delivery.
 
IMPORTANT INFORMATION Please note that all images are supplied for reference purposes only. All tank dimensions and capacities stated are approximate. Consistent with TankDepot.co.uk’s policy of continual improvement, the right is reserved to amend product specifications without notice. E&OE.
 
Website design & content, unless otherwise indicated © 2012 Tank Depot. Website framework and database design © UK Websystems
Developed & hosted by UK Websystems. Access to and use of this website is subject to the Terms and Conditions of Access and Use